This is a special sensor for high temperature application.
High temperature sensor involves high rate of oxidation. Sheaths are selected as per the temperatures and oxidation rate.
High Temperature Sensor For Heat Treatment
Wire Type | Thermocouple |
Element | Simplex / Duplex |
Diameter of Sheath | 16 mm / 19 mm |
Length | As per demand |
Sheath | Straight / L Shaped |
Sheath Material | SS310 / HRS 446 / Inconel / Ceramic |
Termination | Head Type |
Process Connection / Flange | BSP, NPT or Flanged |
The sensor is specially designed for applications where caustic soda is a catalyst.
Corrosion is a major factor that decides the life of a sensor. We design thermocouples for caustic applications. Special sheaths give better life for the sensor.
Caustic Soda Temperature Sensor
Wire Type | Thermocouple |
Element | Simplex / Duplex |
Diameter of Sheath | 16 mm / 19 mm |
Length | As per requirement |
Sheath | Straight / L Shaped |
Sheath Material | SS304 / SS316/ SS310 |
Termination | Head Type |
Process Connection / Flange | BSP, NPT or Flanged |
Ceramic sheath sensor are used in gas generators where oxidation is high.
Our special KER sheaths give excellent life. The ceramic sheath is fitted to a SS collar that also provides an extension. The ceramic tube cannot not bear mechanical shocks, hence have to be handled carefully.
Ceramic Sensor For High Temperature Heat Treatment
Wire Type | Thermocouple |
Element | Simplex / Duplex |
Diameter of Sheath | 16 mm / 19 mm |
Length | As per requirement |
Sheath | Straight |
Sheath Material | SS Collar with KER Ceramic |
Termination | Head Type |
Process Connection / Flange | BSP, NPT or Flanged |
These are normally used at high temperature.
The Mineral Insulated flexible sheath are available in various types depending on the application areas. MI sensors are also used as an inner sheath element.
Application Areas : Gas generators, ovens, high temperature furnace.
Mineral Insulated Head Type Sensors
Wire Type | Thermocouple |
Element | Simplex / Duplex |
Diameter of Sheath | 6mm / 8 mm / 10 mm |
Length | As per requirement |
Sheath | Flexible |
Sheath Material | SS 316/ SS310/ Inconel |
Termination | Head Type |
Process Connection / Flange | BSP, NPT or Flanged |